View TFS167E_1324436.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS167E.doc
version 1.4
22.05.2003
VI TELEFILTER
Measurement condition
Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances at fc *: input: 984 output: 853
Filter Specification
TFS 167E
1/5
II - 8,9 pF II - 8,2 pF
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 167E is the minimum of the pass band attenuation amin . The minimum of the pass band attenuation a min is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 167 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below even if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss (Reference level) Nominal frequency Pass band Amplitude ripple in PB Relative attenuation fN ....... fN fN fN fN 0,4 MHz 0,6 MHz 1 MHz 2 MHz ...... ...... ....... ....... ae fN PB p-p
a rel
typ. Value
6,3 0,1 0,6 1 2 75 MHz MHz MHz MHz MHz 37 38 44 48 2,8 135 dB dB dB dB s ns
2
Limit
max. 8 167 fN max. max. min. min. min. min. max. dB MHz
dB
0,1 MHz 1,0 dB 1 30 35 40 45 3 dB dB dB dB dB s ns
fN fN fN fN fN
Group delay ( mean value in pass band ): Group delay ripple in pass band (p-p): Temperature coefficient of frequency Tcf Operating temperature range Storage temperature range Turnover temperature To
max. 200 - 20 C.. + 70 - 40 C.. + 85
-0,043 ppm/K 28 C
C C
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
generated: checked / approved:
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS167E.doc
version 1.4
22.05.2003
VI TELEFILTER
Package
( all dimensions in mm )
Filter Specification
TFS 167E
2/5
10
6
2,0 Max. 6,50 - 0,1 0
+0 0,2
TFS
167E R21
+0,20
1
19 - 0,10
5 Date code
date code: N P R .....
year + week 2001 2002 2003
1
1,02
Pin 10 Pin 1 Pin 5 Pin 6 Pin 2 - 4, 7 - 9
Input Input RF Return Output Output RF Return Package Ground
1,91 7,62
50 matching network
2,31
L1 Input 50 Ohm L2
10
5
L3 Output 50 Ohm L4
SAW
1,2,3,4,6,7,8,9
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS167E.doc
version 1.4
22.05.2003
VI TELEFILTER
5. Stability characteristics :
Filter Specification
TFS 167E
3/5
After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 - 14 Test N
2. Vibration:
3. Change of temperature
4. Resistance to solder heat (reflow):
reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
6. Packing : Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: Trailer 2000 min 300 mm min 500 mm min 300 mm
Tape (all dimensions in mm) W Po Do E So F G (min) P2 P1 D1(min) Ao Bo Ko t Ct : : : : : : : : : : : : : : : 32 0,3 4 0,1 1,5 + 0,1 1,75 0,1 28,4 0,1 14,2 0,1 0,6 2 0,1 12 0,1 2,0 7,1 0,1 19,6 0,1 2,0 0,1 0,35 0,35 25,5 0,1
pull off direction
X-X
t o WS Ko Do Po P1 P2 E
X
t C
o B
view direction
Ao
D1
X
SPEC-Gurt 0061/ 19X6,5 Q09016:02.001 Jul.10,01
W2
Reel (all dimensions in mm): A W1 W2(max) N(min) C : : : : : 330 32,4 + 2 38,4 100 13 0,5 / - 0,2
A
C
N
W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape in the above shown direction.
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS167E.doc
version 1.4
22.05.2003
VI TELEFILTER
Filter Specification
TFS 167E
4/5
7. Air reflow temperature conditions
1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods main-heating periods 150 C - 170 C over 200 C 60 sec. - 90 sec. 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS167E.doc
version 1.4
22.05.2003
VI TELEFILTER
History Version 1.0 Reason of Changes
Filter Specification
TFS 167E
5/5
Name Chilla
Date 31.05.2002
generation of "Development specification" according to customer requirements and feasibility study changed PB to fN 0,1 MHz 2 dB attenuation level removed added typical values of terminating impedance and relative attenuation changed matching configuration changed typical values of group delay ripple and terminating impedance added typical turn over temperature operating temperature range extended
1.1
Chilla
13.06.2002
1.2
Pfeiffer
11.09.2002
1.3
Pfeiffer
21.10.2002
1.4
Pfeiffer
22.05.2003
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS167E

	To Download TFS167E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .